MAIN CHARACTERISTICS:

Motorized Unit:

• Speed: Up to 5 km/h, with Pressure Sensitive Moving System (Patented)
• Two Independent Motors one for each wheel (Forward and Backward movements)
• Excellent mobility with large rear Wheels for easy transportation, even over small obstacles.
• Driving up to a 5º Slope (8.8%)
• Anti-Collision System (Frontal and Lateral)
• Easy access to any elevator, hallway, doors and patient bedside
• Quick and sturdy Breaking Control System, when the Operator releases the Handle
• Emergency Stop push Button, clearly accessible.

Positioning:

• Counterbalanced Tube-arm
• Electromagnetic breaks that can be released from the Collimator and Front Handle
• Tube-stand Column Rotation: +/- 315º
• Tube Rotation (around the Tube-arm Axis): +/- 180º
• Tube Rotation (around the Tube-head Axis): + 90º / – 30º
• Horizontal Tube Travel (Telescopic Arm): 550 mm. (21.7″):
  • Max extension: 1,250 mm. (49.2″)
  • Min extension: 700 mm. (27.6″)
• Vertical Tube Travel, with Standard Column of 1,980 mm. (77.9″):
  • Vertical Tube Travel: 1,470 mm. (57.8″),
  • Max SID 2,020 mm. (79.5″)
  • Min SID 550 mm. (21.7″)
• Vertical Tube Travel: with Short Column (Optional) of 1,850 mm. (77.9″):
  • Vertical Tube Travel: 1,340 mm. (52.8″)
  • Max SID 2,020 mm. (79.5″)
  • Min SID 550 mm. (21.7″)

COLLIMATOR:

• Manual Collimator with X-ray Covers and area Light Indication
• Possibility of turn the light on from both the Collimator and the Front Panel
• Timer and meter

X-RAY GENERATOR:

Specifications:

• Battery Assisted High-frequency X-ray Generator
• Microprocessor Controlled
• Auto-diagnostic System for easy-maintenance.
• Tube overload protection and continuous monitoring of the remaining Tube H.U.
• Power: 20 kW (According to IEC)
• KVp Range: from 40 KVp to 150 KVp, in 1 KVp Steps
• mA range: from 10 to 320 mA, in Renard scale
• Number of Stations: 18 (10, 12.5, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125, 160, 200, 250, 320 mA)
• mAs Range: from 0.1 to 500 mAs
• Time Exposure Range: from 1 ms. to 10 s. (40 Time stations, in Renard Scale)
• Two steps Hand-Switch for Preparation and Exposure
• Audio and Light Indication for X-ray Exposure

Operation:

• Line requirement: Single Phase 100 or 230 VAC 50/60 Hz. ±10%
• Operation independent from the mains supply
• Independent batteries for the X-ray Generator and the Motorization (with independent indicators)
• Batteries specifications:
  • Lead-acid Maintenance-free
  • Capacity: 15 Amp-h (generator), 9 Amp hr (motorization)
  • Storage Capacity: 120,000 mAs @ 100 kVp (generator)
  • Maximum charge time: 10 hours (generator), 6 hours (motorization)
  • Generator Batteries provide full operation for more than 200 exposures at 80 kVp, 150 mA and 0.5 sec, with 30 sec. between exposures

 X-RAY TUBE:

• Maximum KVp: 150 kVp.
• Rotatory Anode
• Dual focal Spots: 0.7-1.3 mm.
• Power Rating:
  • Small focal Spot: 17.0 kW (50/60 Hz.)
  • Large focal Spot: 40.0 kW (50/60 Hz.)
• Target Angle: 16º
• Anode Heat Storage Capability 300 KHU
• Housing Heat Storage Capability 1,250 KHU
• Low Speed Rotor drives 3,000 r.p.m.

HIGH TENSION CABLES:

• Two Ultra Flexible High Tension Cables 75 kVp.

DIMENSIONS AND WEIGHT:

Dimensions:

• Parking Position:
  • Height: 1,980 mm
  • Width: 670 mm
  • Length: 1360 mm
• Telescopic Arm in Maximum Height and Fully extended:
  • Height: 2,125 mm
  • Width: 670 mm
  • Length: 2,555 mm

Weight:

• Weight: 575 Kg.

MOBILE OPTIONS:

OPTION 1:
Infrared Remote Control for Preparation/Exposure

OPTION 2:
Dose/Area Meter

OPTION 3:
Change to Short Column 1,850 mm

OPTION 4:
Change to X-ray Tube with dual focal Spots 0.6-1.2 mm. and 12º target Angle

OPTION 5:
Sensor Holder with integrated Grid (Lines/In/Ratio determined by Digital Receptor Type)