Canon CXDI-501G

///Canon CXDI-501G
Canon CXDI-501G2017-03-21T11:41:18+00:00

Canon CXDI-501G

Digital Radiography System

The versatile CXDI-501G DR System expands the scope of Digital Radiography with exceptional diagnostic quality. Using Digital Radiography Systems can help to optimize the workflow, allowing healthcare professionals to concentrate on critical tasks. Configurations are available for upright stands, U-arm stands, Bucky tables or retrofit solutions.

Contact / Order
Brochure

High Resolution and High Sensitivity

With a 125 micron pixel pitch, the CXDI-501G Digital Radiography (DR) System delivers exceptional spatial resolution. The maximum 3 second exposure time allows this digital detector to be used with tomography equipment and for other exams that may require an exposure time of up to 3 seconds.

True Portability with Detachable Cable

Weighing less than 7 pounds, either the patient or the x-ray technician may comfortably hold the CXDI-501G DR System in place during image capture. The built-in groove in the detector helps maneuver the detachable cable easily.

CXDI Control Software NE

The CXDI-501G Digital Radiography System uses the Canon CXDI Control Software NE. The software gives a wide range of selections and images can be taken within three touches. An on-screen preview image is available 3 seconds after exposure. The image processing shows subtle details of trabecular bone structure and soft tissue in the same image.

Detector
Method Flat Panel Detector, Scintillator & Amorphous Silicon (a-Si)
Scintillator GOS (Gd2O2S: Tb)
Sensor LANMIT (Large Area New-MIS sensor and TFT)
Pixel Pitch 125 Microns
Pixels 2,800 x 3,408 Pixels (9.5 Megapixels)
Imaging Area Approximately 14 x 17 in (35 x 42.6 cm)
Standard Components Sensor Unit, Power Box, Remote Switch, X-ray Interface Cable
 
Image Acquisition and Processing
Image Processing Standard Advanced Multi-Frequency Processing
A/D 14-bit
Grayscale 4,096 Grayscale (12-bit)
Preview Image Approximately 3 Seconds After X-ray Exposure
Full Image Display Approximately 5 Seconds After X-ray Exposure
 
Data Output and Network Connection
Network Ethernet 10/100/1000 Base T, RJ45 Standard, Wireless Optional
DICOM DICOM 3.0 Compatible, Print Management Service Class (SCU), Storage Service Class (SCU), and Others
 
Electrical and Environmental
Voltage AC 100-240V 50/60Hz
Operating Environment Sensor Unit: 41-95°F (5-35°C), Humidity 30-80% RH (non-condensing)
Physical Characteristics
Dimensions (W x L x H) 18.1 x 16.7 x 0.6 in (460 x 424 x 15 mm)
Sensor Cable Length: 21 ft, 4.5 ft + 16.5 ft (7 m, 1.5 m + 5.5 m)
Weight 6.8 lbs (3 kg)
Specifications are subject to change without notice.